PCD Chamfer Cutter Tool Drill Bit Precision Diamond CNC Bits

• • Tired‑out drill offsets, dimension drift and wasted work‑piece scrap will no longer trouble your CNC drilling workflow with our solid‑tip PCD drill bits.

    Our diamond‑tipped cutters deliver steady machining performance across copper, brass, magnesium alloy, CFRP, GFRP, technical‑grade plastic and graphite.

     

    Unlike standard carbide drills which gradually turn blunt and suffer built‑up edges, material smearing and ongoing edge deterioration, our PCD drill cuts cleanly. Chips will never adhere to your cutting edges during non‑ferrous and composite processing.

    Solid Sintered PCD Cutting‑Edge Structure, Not Thin Diamond Coating

    Many budget diamond‑enhanced drills merely carry a thin deposited diamond coating on top of a carbide substrate. Once this fragile outer film wears away, the tool loses its diamond‑cutting capability entirely.

    Our drill tip adopts monolithic sintered polycrystalline‑diamond. The cutting zone is constructed from solid diamond with no separated substrate and surface coating.

     

    From your very first drilled hole to the last piece in long‑batch manufacturing, cutting‑edge geometry stays unchanged. Hole diameter, breakout quality and hole positioning remain consistent with zero gradual tolerance deviation.

    Outstanding Heat Conductivity Prevents Thermal Dimension Shifts

    Drilling creates an enclosed cutting environment where heat is hard to evacuate. Trapped high‑temperature heat makes conventional cutters expand thermally and break your strict bore tolerance requirements.

    Polycrystalline‑diamond features thermal conductivity five‑fold higher than cemented carbide. Cutting‑generated heat swiftly dissipates away from the tip into the tool shank.

     

    Your cutting‑point temperature stays low throughout the machining cycle. Thermal‑caused dimension drift gets eliminated, which makes our PCD drill especially ideal for demanding deep‑hole drilling jobs.

    Clean CFRP Drilling Without Ply Delamination

    Carbon‑fiber‑reinforced composite brings unique machining hurdles. Blunt carbide drill bits push carbon fibres sideways instead of shearing them neatly. This creates delamination, breakout craters and defective holes unacceptable for aerospace, automobile and premium composite components.

    Our ultra‑sharp solid PCD edge slices every carbon‑fibre instantly upon contact. The material exit side keeps intact hole‑to‑hole.

     

    It is the dependable machining solution for aircraft fuselage fastener holes, vehicle chassis mounting openings and bonded composite joint preparation.

    Full‑Range Work‑Piece Compatibility

    • All‑series aluminium alloy: Burr‑free hole exit, zero built‑up edge and stable bore dimension
    • Copper & brass: Low‑friction cutting and no metal smearing
    • CFRP / GFRP composites: Sharp fibre shearing and anti‑delamination performance
    • Engineering plastic: Avoid resin melting and chip sticking‑up
    • Graphite: Abrasion‑resistant edge against abrasive carbon dust
    • Magnesium alloy: Cool‑running, low‑friction drilling

    Important Reminder

     

    Our PCD drill bits are unsuitable for ferrous‑based work‑pieces including steel, cast iron and stainless‑steel. At high cutting temperatures, diamond will chemically react with iron and rapidly damage the cutting tip.

    Industrial‑Wide Application Scenarios

    ✅ Automotive manufacturing: Oil gallery holes of engine blocks, transmission valve‑body passages, brake part bores

     

    ✅ Aerospace sector: Fastener holes for CFRP fuselage and aluminium structural components

     

    ✅ Consumer‑electronics processing: Housing holes, heat‑sink mounting holes and connector part drilling

     

    ✅ Composite workshop: Rivet and fastener holes on carbon‑fiber panels

     

    ✅ General‑purpose CNC machining: Aluminium profile holes, copper bus‑bar openings and plastic manifold machining

    Lower Your Overall Production Cost

    Comparing only the unit price between carbide drills and PCD cutters tells the full‑story wrong.

     

    Hidden expenses come from frequent tool‑change downtime, repeated CNC parameter offset adjustments, tolerance‑failed scrap parts, post‑processing rework and frequent tool‑stock turnover when you use ordinary carbide drills.

    One single PCD drill can keep working for an entire production shift without replacement. It cuts down all those indirect manufacturing costs.

     

    Always calculate your machining expense based on cost‑per‑finished‑hole rather than single‑piece tool price. When measured this way, solid PCD drills always out‑perform carbide bits for composite and non‑ferrous metal mass‑production.

    Product Specifications

    • Cutting‑tip Material: High‑density sintered polycrystalline diamond (PCD)
    • Stock‑ready standard drill diameters in multiple sizes
    • Custom‑made service: Custom diameter, point angle, flute length and shank style as‑per‑your drawings
    • Delivery: In‑stock items dispatched within working days; custom‑built drills need 10‑18 working‑day lead‑time
    • Flexible MOQ: Small trial‑order is supported

    Share your processed‑material type, hole‑size requirements and CNC machine information with our engineering team, and we will provide tailored drilling‑tool suggestions for your project.

     

Anhui Palton Precision Tools Co., Ltd. is a scientific and technological enterprise focusing on the R&D and production of superhard material cutting tools, headquartered in Bozhou, which is committed to providing high-precision cutting solutions for the global manufacturing industry.

Mainly engaged in PCD/CBN/MCD tool series products, covering CNC inserts, milling cutters, engraving tools and other categories, especially in the field of graphite, ceramics, carbon fibers, aluminum-based silicon carbide and other difficult to machine materials with significant technical advantages.

Value of cooperation:
1)- 17 years + industry technology experience
2)- 2000+ successful processing cases
3)- 24-hour rapid response mechanism
4)- Lifetime technical support commitment
5)- Support customized service ODM OEM OBM
6)- 5-7 working days samples & 10-15 working days bulk delivery (except for special cases)

Company overview

Competitive advantages

Production workflow

Customization capabilities

Factory profile

Packaging & shipping specifications